xylem












Logimac® 210/220 technical specifications


Back

Logimac®





Pre-programmed PLC based pump controller
Designed for functionality and ease of operation, the LOGIMAC pre-programmed PLC's are very easy to use. The operator is in full command, since each LOGIMAC PLC can identify faulty equipment and provide reliable and safe operation of your pumping station.

Logimac® 210/220
Standard duplex pump control with level controlled by 4 level regulators (ENM-10).

Technical specifications
User manual   (245 KB)
Standard schematics  (174 KB)
Logimac® 440
Standard comprehensive control panel for up to 4 pumps. The sump level is controlled by level regulators (ENM-10) with low and high level back-up signal.

Technical specifications  (36 KB)
User manual   (659 KB)
Standard schematics  (798 KB)
Logimac® 280
Standard duplex pump control with
level controlled by ultrasonic or
pressure probe (piezo sensor) with back-up provided by two level regulators (ENM-10).

Technical specifications  (58 KB)
User manual   (613 KB)
Standard schematics (with pressure level sensor)  (712 KB)
Standard schematics (with ultrasonic level sensor)  (785 KB)
Logimac® 330
Standard comprehensive control panel for up to 3 pumps. The sump level is controlled by level regulators (ENM-10) with low and high level back-up signal. An optional operating interface is available to provide the Logimac® 330 with the jockey and storm pump operating sequences.

Technical specifications  (70 KB)
User manual   (479 KB)
Standard schematics
Logimac 330  (565 KB)
Logimac 330 - Jockey/storm  (625 KB)
Logimac® 480
Standard comprehensive control panel for up to 4 pumps. The sump level is controlled by an ultrasonic detector or pressure probe (piezo sensor) with back-up provided by two level regulators (ENM-10).

Technical specifications  (60 KB)
User manual   (572 KB)
Standard schematics (with pressure level sensor)  (887 KB)
Standard schematics (with ultrasonic level sensor)  (905 KB)
* These schematics are for references only.